Vaisala WINDCAP WMT700 Series - Figure 51 System Environment with Serial Ports COM1 and COM2; Figure 52 System Environment with Backup Battery

The following figure shows a system in which serial ports COM1 and COM2 operate
independently. Serial port COM1 is used for maintaining WMT700 and monitoring the wind
sensor in mission-critical applications while COM2 provides continuous measurement data.
Figure 51 System Environment with Serial Ports COM1 and COM2
The following figure shows a system with a separate back-up battery for operating power.
The heating power is supplied with a direct power supply unit that prevents the heating
function from consuming the power supply for the operations. This setup is suitable for
WMT700 product types that provide heating for the wind sensor.
Figure 52 System Environment with Backup Battery
WMT700 User Guide M211095EN-H
184