Vaisala WINDCAP WMT700 Series User Manual

• WS425 – ASOS
Vaisala recommends the WMT700 profile for normal operation. The profile oers a wide
range of predefined and user-configurable data message formats, and it is developed for
WMT700.
The ROSA - MES12 profile is intended for connecting WMT700 to the Vaisala ROSA system.
The WS425
profiles can be used when upgrading from WS425 to WMT700.
More Information
‣
Command Set for WMT700 (page 181)
3.7.3 Protocols
In addition to the protocols preconfigured under standard profiles, there are additional
protocols available:
• WMT700
• WMT700 NMEA MWV
• SDI-12
• WS425 - ASOS
• WS425 - ASCII
• WS425 - NMEA Standard
• WS425 - WAT11
• MES12
More Information
‣
Parameter Handling Commands (page 102)
3.7.4
Measurement and Configuration Modes
The serial ports have two operation modes:
• The
configuration mode is for configuring WMT700 settings over a serial connection.
The selected communication
profile does not aect the available configuration
commands.
• The measurement mode is for operating WMT700. The available commands depend on
the selected
profile. The port in the measurement mode can receive polling commands
and respond to them with data messages.
The following figure shows the configuration and measurement modes of both serial ports
provided by WMT700.
Chapter 3 – Functional Description
41

Vaisala WINDCAP WMT700 Series Specifications

General

Brand	Vaisala
Model	WINDCAP WMT700 Series
Category	Accessories
Language	English