Vaisala WINDCAP WMT700 Series - 5.24.1 WS425 A;B ASCII Commands; 5.24.1.1 I - Identify Sensor

<CR>
Carriage return code, ASCII 0DH
<LF>
Line feed code, ASCII 0AH
To use WMT700 with the NMEA Extended profile, either set the autoSend parameter to
0 to enable polling or define a fixed output interval with the autoInt parameter. If you
are using automatic messages, the value for the autoSend parameter must be set to 15.
Table 52 Checksum Table
ID Character
<id>
Checksum
<chk>
Polling String
A 72
$WIPAQ,*72<CR><LF>
B 71
$WIPBQ,*71<CR><LF>
C 70
$WIPCQ,*70<CR><LF>
D 77
$WIPDQ,*77<CR><LF>
E 76
$WIPEQ,*76<CR><LF>
F 75
$WIPFQ,*75<CR><LF>
G 74
$WIPGQ,*74<CR><LF>
H 7B
$WIPHQ,*7B<CR><LF>
I 7A
$WIPIQ,*7A<CR><LF>
J 79
$WIPJQ,*79<CR><LF>
K 78
$WIPKQ,*78<CR><LF>
L 7F
$WIPLQ,*7F<CR><LF>
M 7E
$WIPMQ,*7E<CR><LF>
N 7D
$WIPNQ,*7D<CR><LF>
O 7C
$WIPOQ,*7C<CR><LF>
5.23.2 WS425 A/B NMEA Extended Data Message
WS425 A/B NMEA Extended data message is as follows:
$P<id>MWV,<dir>,<ref>,<spd>,<uni>,<sta>*<chk><CR><LF>
$P
Fixed text
<id>
Data ID; A … Z
WMT700 User Guide M211095EN-H
146