Vaisala WINDCAP WMT700 Series User Manual

Byte Description
30 End of text
31 Carriage return
32 Line feed
Example
WAP2131870503012.6014.7K99xx
Interpretation of the example message:
• Sensor ID: W
• Command identifier: A
• Sensor status: P = pass
• Averaged wind direction (degrees): 213
• Wind direction (degrees) @ peak wind speed: 187
• Averaging time for wind speed and direction: 05
• Averaging time for peak wind speed and direction (seconds): 03
• Averaged wind speed: 012.6
• Peak wind speed since last WA command: 014.7
• Wind speed units: K = knots
• Signal quality: 99
• Hex checksum (refer to note 4): xx
5.22
WS425 A/B NMEA Standard Profile
When the WS425 A/B NMEA Standard profile is configured, WMT700 sends messages
based on the
configured automatic message interval. There are no operating commands
available for the user.
The following table lists configurable parameters and their allowed and default values for
the WS425 A/B NMEA Standard profile
Table 50
Configurable Parameters for WS425 A/B NMEA Standard Profile
Parameter Default
Value
Profile-Specific Allowed Values Description
address
1 String with 1 character Address for WMT700
autoInt
1 0.25 ... 1000
Resolution: 0.25
Automatic message interval in
seconds. Do not select a message
interval that is shorter than the
time it takes to send a data
message
WMT700 User Guide M211095EN-H
142

Vaisala WINDCAP WMT700 Series Specifications

General

Brand	Vaisala
Model	WINDCAP WMT700 Series
Category	Accessories
Language	English