Vaisala WINDCAP WMT700 Series - Heated Body, Transducers, and Arms

3.9.3 Heated Body, Transducers, and Arms
To avoid injury, do not touch the heated parts of the wind sensor when
the heating is enabled.
WARNING!
The fully heated version of WMT700 is suitable for harsh weather conditions. It provides
heating for the sensor body, transducers, and arms.
The functional principle is the same with the heated transducers and arms. Body heating is
controlled independently of transducer and arm heating. The maximum heating power for
the fully heated WMT700 is 350 W and the average heating power is 250 W in harsh
weather conditions. The inner temperature of the unit is measured continuously. If the inner
temperature starts rising, body heating power automatically reduces to retain the optimum
inner temperature of WMT700.
WMT700 User Guide M211095EN-H
50