LCR - LDT (Leading Digit Table) Table (PGM 221) 1-115
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
3. Select an LCR type (INT, COL, BOTH).
4. Enter Leading Digits (12-digits to compare with a number a user dialed previously).
5. Set up DMT Index with the combo box. You should setup the DMT1 field. Others fields
may be left blank.
Leading Digit Table (PGM 221)
ITEM RANGE DEFAULT REMARK
LCR Type (1)INT
(2)COL
(3)BOTH
BOTH INT: look up this entry only for internal dialing.
COL: look up this entry only after dialing CO Access Code.
BOTH: look up this entry for both INT and COL.
CD 12 digits None To be compared with the dialed digits by a user.
DMT Index Each value 00-99 None Day Zone 1, 2, 3 has 3 time zone DMT indexes (6 digits)
To Next Page
Loading...
