LCR - LDT (Leading Digit Table) Table (PGM 221) 2-107
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
LCR - LDT (Leading Digit Table) Table ( PGM 221)
PGM 221 is for Leading Digit Table.
Operation
1. Select a LCR type (INT, COL, BOTH)
2. Enter Leading Digits (it’s a 12-digit no.to compare with a no. a user dialed previously).
3. Set up [Day Zone] in DMT index.
Leading Digit Table (PGM 221)
ITEM RANGE DEFAULT REMARK
LCR Type (1)INT
(2)COL
(3)BOTH
BOTH INT: look up this entry only for internal dialing.
COL: look up this entry only after dialing CO Access Code.
BOTH: look up this entry for both INT and COL.