VoIB Programming 1-145
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
VoI B Programming
VoI B Programming ( PGM 340)
You can program the VoIB configuration with PC Admin. If you use another application, you may
have problems. We recommend that you check the version of the MPB and the PC Admin.
Operation
1. Select the VoIB board number. If the selected board number is not the VOIB, PC
Admin will display an error message. This program is valid only for VOIB.
2. After selecting the board number, press the [Refresh] button. Then PC Admin will
receive the information about the selected VOIB.
3. Upon initial entry, all data are default values. The same as Network Setting (PGM108),
enter the IP address, gateway address, and subnet mask. Ask your network
administrator for correct values.
4. Ask your network administrator for the DNS address. Trace password is 10 digits and
it is used for tracing data. Numeric values and characters are all available up to 10
digits. You cannot see the password data for security.
5. To save the data, press the [Update] button.
6. To erase the data, press the [Update] button with the field blank.
To Next Page
Loading...
