RSG/IP Phone Programming 1-150
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
RSG/ I P Phone Programming
VOI B Slot Assignment for RSG/ I P Phone ( PGM 380)
RSG/ I P Phone Port Number Assignment ( PGM 381)
The RSG/IP Phone receives call service through VOIB.
Then the VOIB for RSG/IP can be assigned.
If several boards are assigned, assign the first VOIB slot on STA/COL Board in PGM 103.
Operation
1. Click [VOIB Slot Assignment for RSG/IP Phone]. Then default information will be
displayed about RSG/IP Phone.
2. First, select the VOIB slot and update using the first part. If you select the non-VOIB
slot, PC Admin will show an error message. After setting the VOIB slot, press the
[Update] button in the upper menu to save the change.
3. Second, set the port number of each VOIB slot. After changing, press the [Update
Port] button to save this configuration.
4. Next, configure RSG number and IP Phone number to be used. After setting ports,
press the [Update Num] button to save the changes.
To Next Page
Loading...
