LCR Table Initialization (PGM 223) 2-109
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
6. Alternative DMT index : If there is no CO group to select, select alternative DMT index
to be used.(0-99).
LCR Table I nitialization ( PGM 223)
It initializes Day Zone 1,2,3 in LDT, and all CO groups in DMT.
Operation
1. Click [LCR Table Initialization]. Click [Day Zone](1-3). Select a DMT index (0-99), then
press the [Initialize] button to initialize.
2. Select a CO group (1-24), and Click the [Initialize] button that is located below
Initialize CO Group area.
3. Select an alternative DMT index (1-99), and click the [Initialize] button of the Initialize
Alternative DMT Index area.
4. Click [Initialize All LCR Table] to initialize all LCR tables.
Digit Modification Table (PGM 222)
ITEM RANGE DEFAULT REMARK
Bin Number 00-99 -- --
Added Digit Stream 25 digits None Normal digits (0-9, *, #)
Special characters:
[CALLBK]: Pause
[DND/FOR]: Dial-tone-detection instead of pause
[FLASH]: Billing code (Extension Number)
Removal Position 01-12 01 Index to CD stream in Lead table to be removed
Number of Digits to be
Removed
00-12 00 Remove digits in CD stream up to this amount
Add Position 01-13 01 Establishes the position of the CD stream after removal,
where the stream will be inserted.
CO Group 01-24 01 Establishes which CO group is used for LCR dialing
Alternative DMT Index 00-99 None Establishes an alternative DMT index when there is no
idle CO line in CO group.
To Next Page
Loading...
