SBX IP - PC Admin Guide
Chapter 3
Speed Editor
I ntroduction
The Speed Editor is an MS-Windows application program that can download, edit, and upload
speed data of the SBX IP system. This program can send and receive the speed information
such as speed bin number, speed bin name, phone number, CO line type (Net Number), and
CO number (Network index number).
Hardware/ Software Requirements
SBX IP System
• SBX IP system MPB Software Ver 3.7Aa or later.
• A LAN Port must be installed on the MPB for the LAN connection.
• A unique IP Address must be assigned for the LAN connection.
PC
• Pentium Celeron 233MHz CPU or Higher CPU
• 256 color Super VGA (800 * 600) or higher
• NIC (Network Interface Card) for the LAN connection.
• 2-button Mouse
• 32MB RAM minimum
• MS-Windows 98/ME/2000/XP/Vista
• Enough hard drive space for installation
Cable
If a NIC is used for a LAN connection, UTP cable will be needed with an RJ-45 jack between
the PC and the SBX IP system.
Hardware Configuration
To use a LAN connection between a PC and the SBX IP system, the PC and the SBX IP system
should be connected to the local network.
To Next Page
Loading...
