Authorization Code Table (PGM 227) 2-114
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
Authorization Code Table ( PGM 227)
Authorization code table entries consist of each station password and extra account
codes. The table entry from 001 to the maximum capacity of station numbers are saved as
the password of each station. The remaining are extra entries.
CO Line Groups can be marked to deny access until a matched Authorization code is
entered. In this case, DND warning tone is provided when the CO Line Group access code
is dialed. If the dialed Authorization code is verified, you will hear CO dial tone. Otherwise,
you will hear an error tone and you cannot access the group. Stations or Admin
programming can enter the authorization codes. An authorization code is a flexible length
from 3 digits to 11 digits. The Administrator can see and change a station's password.
There can be no duplicate entries. By default, Authorization Codes are not assigned.
Operation
Click [Authorization Code Table].
If a password is registered in the system, it will be shown.
To Next Page
Loading...
