Logical Slot Assignment (PGM 103) 1-15
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
To assign board manually, choose one of the slots and a board type:
When you use this feature, you can not modify the logical port number, except for the
DCOB.
When you assign the DCOB, you can select the logical port number that you want. It has
range from 0 to 30 ports.
Any board except the DCOB has a fixed logical port number.
If you want to see the attributes of an installed slot, you can select the "View" menu in
above window.
When you select an empty board menu, a confirmation window will be displayed and will
ask once more to avoid a mistake.
Logical Slot Assignment (PGM 103)
The COL board and STA board is assignable either automatically or manually. If the dipswitch
is off, they will be assigned automatically, otherwise manually. The VMIB is assignable only
manually, regardless of the dipswitch status.
Operation
1. Select the [Logical Assignment] in Rack Slot Assignment Setting Window (Figure 1-1).
If any board is preset automatically by the system, it shows the boards on the dialog
box.
2. Add the slot to the appropriate location on the right side. If you select the Station
board, you should enter the slot to the station window.
3. If you want to change the order of slots, use [Up] and [Down] button to change the
order of the boards
4. After editing, press the [Update] button to save changed values.
5. If you want to remove it, select a slot number below COL board, STA board, or VMIB
and click the left arrow button [ << ].
To Next Page
Loading...
