Incoming CLI Destination Table (PGM 237) 1-137
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
I ncoming CLI Destination Table ( PGM 237)
An incoming DID destination can be associated with the incoming CLI. If a CLI number is
registered and assigned a destination within the Incoming CLI Destination Table, all DID calls
with this CLI will be routed to the corresponding destination.
Note: - This feature is supported only when the CO type is set as DID.
- This feature is executed first, when system receives a DID call with CLI.
(PGM 237)
BTN ITEM RANGE DEFAULT REMARK
1 CLI Number 001-100 --
2 Conversion Index Table -- --
To Next Page
Loading...
