Vertical SBX IP - Station IP List for CTI (PGM 126)

Copy DSS Button (PGM 125) 1-44
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
Copy DSS Button ( PGM 125)
The assigned DSS buttons of a DKTU can be copied to another station or ICM group. This does
not apply to the DSS Box.
Operation
1. Click the [Copy To DSS] button.
2. Enter the station number and select the type of destination.
You can select one of two types of destination. One destination is station and the other is
ICM Group.
3. After entering the data, press the [Update] button to save the data.
Station I P List for CTI ( PGM 126)
You can make a CTI connection with a LAN connection. To use this feature, you must enter the
IP address of the PC that you want to use CTI with. For example, if you use station 101 and its
IP address is 10.0.0.5 then you should enter this table with station 101 and IP Address of
10.0.0.5.
You can enter this mapped table up to the max station numbers of the SBX IP system. The
limitation depends on the lock key that is installed on the SBX IP system.
Release 3.5
June 2010