Vertical SBX IP - ISDN System Base Program; ISDN Attributes (PGM 200)

ISDN System Base Program 1-110
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
I SDN System Base Program
To change the ISDN related features you use PGM200-PGM202.
I SDN Attributes (PGM 200)
You can change the ISDN attributes using this menu.
Operation
1. Click [ISDN Attributes].
2. Refer to the following table, enter the data, then click on [Update] to save your input.
ISDN Attributes (PGM 200)
ITEM RANGE DEFAULT REMARK
CO ATD Max of 2
digits
-- According to PGM 114 - Btn 5, CO ATD code or Extension
number can be attached to the CLI, COLP message
My Area Code Max of 6
digits
-- Local Area Code
My Area Prefix Code Max of 4
digits
-- Prefix Code of Local Area Code
Release 3.5
June 2010