Station Group 1-101
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
Station Group
You can group stations, and allow an idle station in a group to respond to a call.
Station Group Assign ( PGM 190/ 191)
Stations in the system can be grouped so that incoming calls will search (hunt) for an idle station
in the group. Three hunting processes can be assigned: Circular, Terminal, or UCD (Uniform
Call Distribution). Each of the system's groups is assigned as a function: Call Pick-Up Group
and/or Hunt Group, Voice Mail Group, and Ring Group. The available groups per system and
stations per group is as follows:
• Number of Groups per system = 10
• Stations per group = 26
A station can belong to any number of Pickup groups, but can only belong to one Station Hunt
group, Voice mail group, or Ring group.
When assigning a station group to any type of hunt group or voice mail group, ring, pick up
group, the system initializes hunt attributes by default value for it's own function. It can be
programmed to meet each customer's individual need.
Operation
1. Click [Station Group].
2. Select a group.
3. Press the [Update] button (will be displayed by right-clicking with the mouse) to add or
modify members.
There are two parts in the window. One part is the assigned group number list and the
second is for member configuration.
If you select one station group in the left field, the station that is a member of the group will
be displayed automatically.
If you want to add or edit the station group, select the [Update Tool] button in popup menu.
Then a second window will display for editing or adding station group data.
Also, you can assign the attributes of each group with [Attribute Assign] menu of popup
menu. This window is displayed on the next page.
To Next Page
Loading...
