Slot Assignment (PGM 101) 1-14
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
Slot Assignment ( PGM 101)
The SBX IP system supports a max of 10 slots. This program assigns each slot to one type of
the boards. Slot Assignment is possible by the system automatically or by the PC Admin
program manually. If the dipswitch is off, the system automatically senses the board. If the
dipswitch is on, you have to assign each board to the slot where it is placed. Then reset the
system. The PC Admin software shows the same shape GUI type for slot configuration.
Operation
1. Right-click in the upper area of the PC Admin window to dispay a menu, then click
[Configuration]. The configuration window displays similar to that shown above. The
window is a GUI type and it will display the correct slot numbers automatically.
2. With this window, you can add/delete slots by GUI screen and mouse operation. If you
want to add or delete a slot, right-click on the slot with the mouse. Then a sub menu
will display.
To Next Page
Loading...
