Vertical SBX IP - Board Attributes (PGM 155); Station Base Program

Board Attributes (PGM 155) 1-20
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
Board Attributes (PGM 155)
You can program the board attributes of equipped board.
Operation
1. [Configuration] > [Select slot] > [Board Attribute (R2 CRC Check)].
2. If you select the slot number, then R2 CRC Check data will be displayed.
3. If selected board is not DCOB12, a message box will display that says "The selected
slot is not DCOB12."
Station Base Program
Use Station Base Programming to change any station related function. Station Base Program
items are from PGM 110 to PGM 131 & 250. When you use station base program items, you
must enter the station range.
Station I D Assignment ( PGM 110/ 111/ 112/ 113/ 114)
This menu is related with assigning the phone type for each station. First, select the station list.
In this window, you can select other menus such as station attributes or flex button assignment.
Operation
1. Click [Station List].
Release 3.5
June 2010