WAGNER Titanus Micro-Sens - Page 32

Technical Description
TITANUS MICRO·SENS
®
32
06/13
Figure 12: TITANUS MICRO·SENS
®
display variant with smoke levels and fire loca-
tion
Numbers Function Explanation
1 Smoke level display 1 to 10
(10 yellow LEDs) (*) Current smoke level
Operation (green LED) Operation display
Fire alarm (red LED) Smoke level (where fire
alarm threshold is set)
Action alarm (red LED) (*) Smoke level (Value as per
fire alarm threshold 10 – 80
% adjustable)
Fault (yellow LED) Pipe system fault or ventila-
tor breakdown or detector
module fault
Locating the seat of the fire A – E
(5 red LEDs) (*)
Locating the seat of fire
Infrared interface Commissioning and fault
diagnostics
2 Air sampling pipe connection
for ∅ 25 mm-pipe system
3 Cable feed, fire alarm cable for switching on
FAS and/or power supply (in/out)
2 x M 25
4 Air return pipe connection for air return
5 Cable feed fire alarm cable 8 x M 20
6 Cable entries (small) 2 x M 20 for cable with
∅ of 1 to 13 mm
7 Cable entries (large) 1 x M 25 for cable with
∅ 1 to 18 mm
(* optional)
TITANUS MICRO·SENS
®