6 Create Methods, Sample Sets, and Sample Templates
168 July 29, 2013, 715003794 Rev. B
4. To enter control parameters for Waters detectors, refer to the “Setting
absorbance parameters” and “Setting RI parameters” procedures that
follow.
Detector selections:
Parameter Function Selections
Absorbance
Detector (1)
Enables a Waters 2487 or 486 UV/Vis
Detector channel.
2487, 486, or Not
used
Absorbance
Detector (2)
Enables a second Waters 2487 or 486
UV/Vis Detector channel.
2487, 486, or Not
used
Refractive
Index Detector
410
Enables a Waters 2414, 2410, or 410
Differential Refractometer.
410 or Not used
Absorbance (1)
(screen key)
Displays the 2487 or 486 TUV screen
(see the “2487(1) UV/Vis Detector
screen:” on page 169).
See the table titled
“2414, 2410, and
410 RI
parameters:” on
page 171
Absorbance (2)
(screen key)
Displays the second 2487 or second
486 TUV screen (see the “2487(1)
UV/Vis Detector screen:” on
page 169).
See the table titled
“2414, 2410, and
410 RI
parameters:” on
page 171
RI (screen key) Displays the 2410/410 RI screen (see
the “410 Detector screen:” on
page 171).
See the table titled
“2414, 2410, and
410 RI
parameters:” on
page 171.
Table (screen
key)
Displays the Detector Table (see the
“410 Detector screen:” on page 171).
See the table titled
“2487 and 486
Detector Events
parameters:” on
page 173.
To Next Page
Loading...
