Xerox 4112 User Manual

Machine Status
10-16 Xerox 4112/4127 Copier/Printer
User Guide
Eject
Command PG
156 0: Off (Default)
1: On
Set whether the command is processed as an eject command.
Eject
Command AF
157 0: Off (Default)
1: On
Set whether the command is processed as an eject command.
Eject
Command AH
158 0: Off (Default)
1: On
Set whether the command is processed as an eject command.
Scale 159 0: Off
1: On (Default)
Set whether scaling is performed to enlarge or reduce the document size to
fit the paper size.
Scale Mode 160 0: Paper Size (Default)
1: Active coordinate area
Set how the document size is specified when [Document Size] (101) is set to
[Auto] (99).
[Paper Size] Set the document size to the minimum size that combines the
active coordinate area from the active coordinate determining method and
the active coordinate obtained by the settings of Origin Position and Paper
Margin.
[Active Coordinate Area] Set the document size to the area from which the
paper margin is subtracted from the active coordinate area obtained by the
active coordinate determining method.
Active Area
Determining
Command
161 0: Auto (Default)
1: PS
2: IW
3: IP
4: Adapted
Set the method for obtaining the active coordinate area.
[Auto] sets the method for obtaining the active coordinate area.
[PS]: The rectangular area is defined by the area specified by the first [PS]
command.
[IW]: The rectangular area is defined by the area specified by the last [IW]
command.
[IP]: The rectangular area is defined by the area that encompasses all [IP]
commands.
[Adapted]: The rectangular area is defined by an area calculated from the
maximum/minimum coordinates of the area and the coordinates plotted by
the drawing commands, and the maximum size of characters and the line
widths present on the page.
Paper Margin 162 0-99: 0 to 99 mm (0: Default)
Set the paper margins.
Parameter Item Value

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English