Xerox 4112 User Manual

Problem Solving
12-30 Xerox 4112/4127 Copier/Printer
User Guide
016-729 m Cause: Unable to print because the number of colors/resolution of
the TIFF file exceeds the allowed range.
Remedy: Change the number of colors/resolution for the TIFF file,
and specify the print data again.
Refer to Generic Scan Screen Features on page 3-2.
016-730 m Cause: Detected a command not supported by ARTIV.
Remedy: Check the print data, remove the offending command,
and try to print again.
016-731 m Cause: Unable to print TIFF data because it was interrupted.
Remedy: Retry printing.
016-732 m Cause: Unable to use registered form specified by Emulation with
host.
Remedy: Resend the form data.
016-733 mm Cause: 1. Unable to retrieve IP address from text on the right side of
@ of an address during E-mail send.
2. Unable to resolve Internet address on the right side of @ by DNS.
Remedy: 1. Check the mail address.
2. Check the DNS address.
016-735 mmCause: Attempted to print Job Template List while updating the job
template.
Remedy: Retry printing after waiting for a period.
016-738 m Cause: Booklet Creation is not applied to the specified paper.
Remedy: Specify the printable paper size for booklet creation.
016-739 m Cause: The specified document and paper size are an unauthorized
combination.
Remedy: Specify the combination of the printable document and
paper size for booklet creation.
016-740 m Cause: Booklet Creation is not applied to the specified paper tray.
Remedy: Specify the printable paper tray for booklet creation.
016-746 m Cause: An unsupported feature is included in received PDF.
Remedy: Print using printer driver.
016-748 mm mCause: Printing is not possible due to insufficient hard disk space.
Remedy: Reduce the number of pages of print data, for example, by
dividing up the print data or printing one copy at a time when
making multiple copies.
016-749 m Cause: A PJL command syntax error occurred.
Remedy: Either confirm the print settings, or correct the PJL
command.
016-755 m Cause: Attempted to process PDF file which was specified to
printing prohibited.
Remedy: Cancel the printing prohibited specification using Adobe
Reader and try to print again.
016-756 m Cause: No permissions to use the service.
Remedy: Check with your System Administrator.
016-757 m Cause: Password is incorrect.
Remedy: Enter the correct password.
Error Code
Category
Cause and Remedy
C P S
M
O

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English