EasyManuals Logo

Xerox 4112 User Manual

Xerox 4112
436 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #325 background imageLoading...
Page #325 background image
Problem Solving
Xerox 4112/4127 Copier/Printer 12-31
User Guide
016-758 m Cause: No Permissions to use service.
Remedy: Check with your Auditron Administrator.
016-759 m Cause: Maximum number of pages for this service has been
reached.
Remedy: Check with your Auditron Administrator.
016-760 m Cause: An error occurred during PostScript processing.
Remedy: Take one of the following actions:
Set Print Mode to Speed Priority.
Increase PostScript memory.
For information about Print Modes, refer to the print driver's online
help.
For information about memory, refer to “Allocate Memory” in the
System Administration Guide.
016-761 m Cause: An error occurred during image processing.
Remedy: Set the Print Mode to Speed Priority and start printing
again. If this does not remedy the error, print in the Ensure Print
mode.
016-762 m Cause: A print language not installed on the machine was specified.
Remedy: In Specify Print Mode under Port Settings, specify a print
language.
016-764 m Cause: Could not connect to the SMTP server.
Remedy: Contact the SMTP Server Administrator.
016-765 m Cause: Could not send mail as the hard disk on the SMTP server was
full.
Remedy: Contact the SMTP Server Administrator.
016-766 m Cause: An error occurred on the SMTP server.
Remedy: Contact the SMTP Server Administrator.
016-767 m Cause: Could not send mail as the mail address was wrong.
Remedy: Check the mail address and transmit again.
016-768 m Cause: Could not connect to the SMTP server as the mail address of
the machine was incorrect.
Remedy: Check the mail address of the machine.
016-769 m Cause: The SMTP server does not support confirmation of mail
distribution (DSN).
Remedy: Send mail without setting confirmation of mail
distribution (DSN).
016-771
016-772
m Cause: Unable to retrieve scan data repository address from the
CentreWare scan service.
Remedy: Check the DNS address or define the scan data repository
address by its IP address.
016-773 m Cause: The IP address for the machine is not set properly.
Remedy: Check the DHCP environment or specify a fixed IP address
for the machine.
For information about network settings, refer to the System
Administration Guide.
Error Code
Category
Cause and Remedy
C P S
M
O

Table of Contents

Other manuals for Xerox 4112

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox 4112 and is the answer not in the manual?

Xerox 4112 Specifications

General IconGeneral
BrandXerox
Model4112
CategoryAll in One Printer
LanguageEnglish

Related product manuals