Xerox 4112 User Manual

Problem Solving
Xerox 4112/4127 Copier/Printer 12-39
User Guide
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
116-790
m Cause: There was a problem with parameters in the JBIG data. They
were automatically edited.
Remedy: If any problem occurs in job result, try to process the job
again.
116-780 mmCause: There is a problem with the document attached to the
received mail.
Remedy: Check the attached document.
123-400 m Cause: A malfunction occurred in the machine.
Remedy: Power-cycle the machine. If the machine error is not fixed
by performing the relevant remedy, contact the Customer Support
Center.
127-210 mmCause: Communication error between the printer and the
controller. Error detected by the printer.
Remedy: Remove and reinsert the cable connection between the
printer and the controller. Power off and on both the printer and
the controller. If the problem persists, call the Customer Support
Center.
127-211 mmCause: Detected a communication error between the printer and
the controller.
Remedy: Remove and reinsert the cable connection between the
printer and the controller. Power off and on both the printer and
the controller. If the problem persists, call the Customer Support
Center.
127-212 mmCause: Detected an internal print check error by the controller.
Remedy: Remove and reinsert the command/video cable between
the controller and the printer. Power off and on both the printer
and the controller. If the problem persists, call the Customer
Support Center.
127-213 mmCause: Detected a mismatch with the software version of the
controller.
Remedy: Contact the Customer Support Center for information
and/or instructions to remedy the problem.
127-220 mmCause: Detected a communication error of the video system by the
controller.
Remedy: Remove and reinsert the cable connection between the
printer and the controller. Power off and on both the printer and
the controller. If the problem persists, call the Customer Support
Center
127-221 mmCause: Detected a communication error by the controller.
Remedy: Remove and reinsert the cable connection between the
printer and the controller. Power off and on both the printer and
the controller. If the problem persists, call the Customer Support
Center.
127-311 mmCause: Detected a fatal error by the controller.
Remedy: Power on/off both the controller and the printer. If the
problem persists, contact the Customer Support Center.
Error Code
Category
Cause and Remedy
C P S
M
O

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English