Xerox 8830 Service Manual

Change Tag Index
Introduction
The purpose of this section is to list the
Change Tag Index.
All important modifications are identified by a
tag number on a matrix card attached to the
machine.
This section describes all of the tags as well
as multinational applicability, classification
codes, and permanent or temporary
modification information.
Classification Codes
A tag number may be required to identify
differences between parts that cannot be
interchanged, or differences in diagnostic,
repair, installation, or adjustment procedures.
A tag number may also be required to identify
the presence of optional hardware, special
non-volatile memory programming, or if
mandatory modifications have been installed.
Each tag number is given a classification code
to identify the type of change the tag has
made:
M - Mandatory
N - Not installed in the field
O - Optional
R - Repair
TAG: 1
CLASS:
USE: Ail
MFG. SERIAL NUMBERS:
NAME: EME enhancements within
Assembly 62K7891
PURPOSE: Improves EME emissions.
KIT NUMBER: N/A
REFERENCE:
TAG: 2
CLASS:
USE: Ail
MFG. SERIAL NUMBERS: US - 8YG060261 -
--EO-110907224-1
NAME: IOT Firmware update
PURPOSE: Updates IOT Firmware to
00.32.00-10
KIT NUMBER:
REFERENCE:
TAG: 3
CLASS:
USE: AH
MFG. SERIAL NUMBERS: US - 8YG060018 -
-EO-110907224-1
NAME: IOT Controller PWB
PURPOSE: Enabled folder Interface
KIT NUMBER: N/A
REFERENCE:
TAG: 4
CLASS:
USE: All
MFG. SERIAL NUMBERS: US - 8YG060120 -
-EO-110907064-1
NAME: IOT Controller PWB
PURPOSE: Updates IOT Firmware to
00.33.00-10
KIT NUMBER: N/A
REFERENCE:
8830
1/98
6-47
Tag Matrix

Xerox 8830 Specifications

General

Brand	Xerox
Model	8830
Category	Printer
Language	English