Xerox 8830 Service Manual

TAG: 19
CLASS:
USE: Ali
MFG. SERIAL NUMBERS: US - 8YG061469
to 474/688 to 670
NAME: Output Current Adjustment
PURPOSE: Establishes the correct
electrostatic setup voltages for the Printer.
KIT NUMBER: 105K13542
REFERENCE:
TAG: 20
CLASS:
USE: All
MFG. SERIAL NUMBERS:-
NAME: New Fuser Oil Assembly with new
Timing Disk
PURPOSE: Improved Performance
KIT NUMBER: 94K0330
REFERENCE:
TAG: 21
CLASS:
USE: Ali
MFG. SERIAL NUMBERS -
NAME: New Front Panel
PURPOSE: Enables installation of Stacker
Full Switch
KIT NUMBER: 30K55633
REFERENCE:
TAG:23
CLASS:
USE:
MFG. SERIAL NUMBERS: 8YG061468 to
474/668 to 670
NAME: I0T Firmware Upgrade
Version 01.05.0-13
PURPOSE: Enables 8830 DDS System
KIT NUMBER: NACO - 600K59936
EO - 600K59956
REFERENCE:
TAG: 40
CLASS:
USE: Ali
MFG. SERIAL NUMBERS: 8YG061364 to
367
NAME: New Cutter Motor
PURPOSE: improved Performance
KIT NUMBER: US - 50K32172
REFERENCE:
TAG: 90
CLASS:
USE: Ali
MFG. SERIAL NUMBERS:
NAME: A/B Switch
PURPOSE: Enables the Printer to be
connected to the XPC and to the 8830
Controller.
KIT NUMBER: 98K65670
REFERENCE: Spares - 162K41460,
162K41440,162K28840
Tag Matrix
1/98
6-50
8830

Xerox 8830 Specifications

General

Brand	Xerox
Model	8830
Category	Printer
Language	English