DEVELOPER
MODULE
9.7 TONER/DEVELOPER DISPENSE (2 OP 2)
CARTRIDGE HOME SENSOR
MAGNETIC ACTUATION
TONER/DEVELOPER
CARTRIDGE
DEVELOPER HOUSING
VIEW: RIGHT REAR
WARNING
THE DEVELOPER MODULE HAS
APPROXIMATELY -350 VOLTS DC
APPLIED TO ITS SURFACE. USE CAUTION.
CARTRIDGE
OPENING
CARTRIDGE
DRIVE BUTTON
DISPENSED
TONER/
DEVELOPER
DISPENSED
TONER/
DEVELOPER
TONER SENSOR
A22Q1
CUSTOMER
INSTALLED
CARTRIDGE
TONER / DEVELOPER DISPENSE DIAGNOSTIC CODES
INPUT POWER BLOCK
+5 VDC
DC COM
+28 VDC (BULK)
DC COM
SUPPLY (A5) J3-14
SUPPLY (A5) J3-11
SUPPLY (A5) J3-14
SUPPLY (A5) J3-17
TONER HOME SENSOR: (INPUT)
TONER MOTOR: (OUTPUT)
DISABLE OF TONER FAULTS THIS ENABLES THE MACHINE TO BE
OPERATED UNTIL THE TC COMES BACK WITHIN THE ACCEPTABLE
RANGE. THE MACHINE WILL AUTOMATICALLY CLEAR OUT THIS
LOCATION WHEN THAT OCCURS.
CYCLE TONER / DEVELOPER CARTRIDGE: (OUTPUT) THIS WILL CYCLE
THE CARTRIDGE ONE TIME. THE TONER / DEVELOPER CARTRIDGE WILL
BE IN THE HOME POSITION WHEN THIS TEST IS COMPLETE.
8830
1/98
7-71
Chain 9 Xerographics
To Next Page
Loading...
