February 2013
4-343
ColorQube® 9303 Family
REP 91.15
Repairs/Adjustments
4. Remove the ink loader backup cover, PL 81.10 Item 8 and ink loader top, PL 81.10 Item
6. Refer to Figure 2.
Figure 2 Ink loader backup cover and top cover
5. Disconnect the media path driver PWB, Figure 3. See note.
Figure 3 Disconnect harness
1
Remove 2 screws, then remove the ink
loader backup cover.
4
Remove the ink
loader top by lifting at
the rear then sliding
to the front.
3
Remove 3 screws
marked A.
2
Remove 2
screws.
1
Disconnect PJ406.
2
Feed the cable through the
machine frame and release from
the cable clips.
Note: View on the underside of the media
path driver PWB.
To Next Page
Loading...
Need help?
General
