Xerox ColorQube 9301

February 2013
4-173
ColorQube® 9303 Family
REP 12.36-171
Repairs/Adjustments
7. Figure 3, remove the rear blade support.
Figure 3 Rear support removal
CAUTION
Do not loosen the three red screws that surround the lower support guides
8. Figure 4, remove the support guides (4 places).
Figure 4 Support guide removal
Replacement
Reverse the removal procedure to replace the crease blade assembly.
1
Remove E-clip.
3
Remove E-clip.
2
Release the rear
connecting rod
and bearing.
4
Remove rear
blade support.
1
Depress the centre
of the guide.
2
Pull the guide outward to remove.
Red screws -
see caution.