7.3 Setting Motion Parameters
7.3.1 Displaying and Setting Motion Parameters
7-20
3.
Double-click the motion parameter to set or monitor.
The Display in axis selected Dialog Box will be displayed.
4.
Select the axis to set or monitor, and then click the OK Button.
The tab page for the selected motion parameter will be displayed.
5.
Check or change the settings of the motion parameters.
To change which motion parameters are displayed, double-click the required motion parameters in
the Work Space Pane.
The following figures show examples of the tab pages for each group of motion parameters.
• Fixed Parameter Tab Page
To Next Page
Loading...
