YASKAWA SVC - Connection Specifications

9.2 Connection Specifications
9-3
9
Stepping Motor Drive Operation
9.2 Connection Specifications
The following table lists the specifications for a Stepping Motor Drive connection.
Item Description
Number of Stepping Motor
Drives that can be connected
4 max.
Transmission cycle 125 μs, 250 μs, 500 μs, or 1 ms
Interface
Fixed parameters (usage condition settings)
Setting parameters (updating references and output data)
Monitor parameters (updating monitor and input data)
Self configuration Supported.
Others
Compliant with the MECHATROLINK-III standard Stepping Motor Drive
profile specifications.