YASKAWA SVC - Index; Revision History

Revision History-1
Revision History
The date of publication, revision number, and web revision number of the manual are given on the bottom
right of the back cover. Refer to the following example.
Date of
Publication
Rev.
No.
WEB revi-
sion number
Section Revised Content
August 2017 <5> 1 3.4.3 Revision: Information on Bit 5 in IW0C
Back cover Revision: Address
April 2017 0 All chapters Completely revised.
Back cover Revision: Address
October 2016 <4> 0 4.3, 4.4 Addition: Information on bit D (Torque Base Unit of SERVOPACK) in
fixed parameter No. 1
July 2016 <3> 1 4.4 Revision: Information on bits for IL28
4.4, 5.1 Deletion: Setting precautions for Position Reference Type
(OW09 Bit5)
March 2016 0 – Based on Japanese user’s manual, SIJP C880725 11G<6>-0, pub-
lished in February 2016.
All chapters Completely revised.
Back cover Revision: Address
May 2015 <2> 0 – Based on Japanese user’s manual, SIJP C880725 11D<3>-0, pub-
lished in November 2014.
Front cover,
spine
Revision: Format
All chapters Completely revised.
Back cover Revision: Format and address
September 2013 <1> 1 2.2 Revision: Diagram of phase reference generation when using an
electronic shaft
Back cover Revision: Address
October 2012 0 – Fully revised.
Back cover Revision: Address
March 2012 <0> 1 1.1 Deletion: Descriptions of Option Modules and the Rack Expansion
Interface Unit.
Back cover Revision: Address
December 2011 – – – First edition
MANUAL NO. SIEP C880725 11B <1>-0
Published in Japan October 2012
Date of publication
Web revision number
Revision number