YASKAWA SVC - 3.1 Types of Motion Parameters

3.1 Types of Motion Parameters
3-2
3.1 Types of Motion Parameters
Motion parameters are necessary to perform motion control. Motion parameters include fixed
parameters, setting parameters, and monitor parameters.
Descriptions of the various types of motion parameters are given in the following table.
Refer to the following section for details on the setting methods for parameters.
7.3 Setting Motion Parameters on page 7-19
Parameters Overview
Fixed Parameters These parameters are used to make settings related to the servo system.
Setting Parameters
These parameters are used to set detailed aspects of control references used in motion
control.
Monitor Parameters These parameters are used to monitor the servo system.