YASKAWA SVC - Page 477

Of the information that is necessary to use the SVC Func-
tion Module to perform motion control with a Stepping
Motor Drive, this chapter provides only the information that
is different from when a Servo Drive is connected.
9.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
9.2 Connection Specifications . . . . . . . . . . . . . 9-3
9.3 Parameter Support Table . . . . . . . . . . . . . . 9-4
9.3.1 Fixed Parameter Table . . . . . . . . . . . . . . . . . . . . 9-4
9.3.2 Setting Parameter Table . . . . . . . . . . . . . . . . . . . 9-7
9.3.3 Monitor Parameter Table . . . . . . . . . . . . . . . . . . 9-16
9.4 Link Assignments . . . . . . . . . . . . . . . . . . . 9-25
9.5 Common Parameters . . . . . . . . . . . . . . . . 9-26
Stepping Motor Drive
Operation
9