YASKAWA SVC - Page 568

10.6 Alarm and Warning Codes for Inverter
10.6.1 A1000
10-66
*1. You can monitor in the following cases.
• When the Inverter Drive Control command is executed when bit 6 (Alarm code) of Input Data Option Selection
(OW0D) is ON.
• When the Inverter I/O Control subcommand is executed when bit 6 (Alarm code) of Auxiliary Input Data
Option Selection (OW0F) is ON.
*2. You can monitor the current alarm codes when the Alarm Monitor or Alarm History Monitor command is exe-
cuted.
0061H Uv4 Gate Drive Board Undervoltage
0083H CPF02 A/D Conversion Error
0084H CPF03 Control Board Connection Error
0087H CPF06 EEPROM Memory Data Error
0088H, 0089H CPF07 or CPF08 Terminal Board Connection Error
008CH CPF11 RAM Fault
008DH CPF12 FLASH Memory Fault
008EH CPF13 Watchdog Circuit Exception
008FH CPF14 Control Circuit Fault
0091H CPF16 Clock Fault
0092H CPF17 Timing Fault
0093H CPF18
Control Circuit Fault
0094H CPF19
0095H, 0096H CPF20 or CPF21 Control Circuit Error
0097H CPF22 Hybrid IC Error
0098H CPF23 Control Board Connection Error
0099H CPF24 Drive Unit Signal Fault
009AH CPF25 Terminal Board not Connected.
009BH to 00A4H CPF26 to CPF35
Control Circuit Error
00A9H to 00AEH CPF40 to CPF45
0101H oFA00 Option Card Connection Error at Option Port CN5-A
0102H oFA01 Option Card Fault at Option Port CN5-A
0103H oFA02 Same type of Option Card already connected
0106H oFA05
Option Card Error Occurred at Option Port CN5-A0107H oFA06
0111H, 0112H oFA10 or oFA11
0113H to 0118H oFA12 to oFA17 Option Card Connection Error (CN5-A)
0131H to 013EH oFA30 to oFA43 Comm. Option Card Connection Error (CN5-A)
0201H oFb00 Option Card Fault at Option Port CN5-B
0202H oFb01 Option Card Fault at Option Port CN5-B
0203H oFb02 Same type of option card already connected
0206H oFb05
Option Card Error Occurred at Option Port CN5-B
0207H oFb06
0211H oFb10
0212H oFb11
0213H to 0218H oFb12 to oFb17 Option Card Error Occurred at Option Port CN5-B
0301H oFC00 Option Card Connection Error at Option Port CN5-C
0302H oFC01 Option Card Fault at Option Port CN5-C
0303H oFC02 Option Card Fault at Option Port CN5-C
0306H oFC05
Option Card Error Occurred at Option Port CN5-C
0307H oFC06
0311H oFC10
0312H oFC11
0313H to 0318H oFC12 to oFC17 Option Card Error Occurred at Option Port CN5-C
0351H to 0356H oFC50 to oFC55 Option Card Error Occurred at Option Port CN5-C
Continued from previous page.
Alarm Code
(IW19
*1
/IW32
*2
)
Digital Operator
Display
Name