vi
Using this Manual
Basic Terms
Unless otherwise specified, the following definitions are used:
• Machine Controller: MP3000-series Machine Controller or MP2000-series Machine Controller.
• MPE720: The Engineering Tool or a personal computer running the Engineering Tool
• M-III: MECHATROLINK-III communications
• Fixed parameters: The fixed parameters in the motion parameters.
• Setting parameters: The setting parameters in the motion parameters.
• Monitor parameters: The monitor parameters in the motion parameters.
• PLC: A Programmable Logic Controller
• MP3000: A generic name for the MP3100, MP3200, and MP3300.
• MP3200: A generic name for the Power Supply Unit, CPU Unit, Base Unit, and Rack Expansion
Interface Unit.
• MP3300: A generic name for the CPU Module and Base Unit.
• SVC Function Module: A generic name for the SVC and SVC32.
• SVR Function Module: A generic name for the SVR and SVR32.
Engineering Tools Used in This Manual
In this manual, the operation is described using MPE720 screen captures.
Trademarks
• QR code is a trademark of Denso Wave Inc.
• MECHATROLINK is a trademark of the MECHATROLINK Members Association.
• Ethernet is a registered trademark of the Xerox Corporation.
• Other product names and company names are the trademarks or registered trademarks of the
respective company. “TM” and the
®
mark do not appear with product or company names in this
manual.
Visual Aids
The following aids are used to indicate certain types of information for easier reference.
Indicates precautions or restrictions that must be observed.
Indicates alarm displays and other precautions that will not result in machine damage.
Indicates definitions of difficult terms or terms that have not been previously explained in this manual.
Indicates operating or setting examples.
Indicates supplemental information to deepen understanding or useful information.
Important
To Next Page
Loading...
