YASKAWA SVC - Page 612

11.5 Common Parameters and SERVOPACK Parameters
11-39
11
Appendices
84 PnB08 Zero Point Return Approach Speed
85 PnB0A Zero Point Return Creep Speed
86 PnB0C Final Travel for Zero Point Return
87 PnB0E Monitor Select 1
88 PnB10 Monitor Select 2
89 PnB12 Monitor Select for SEL_MON1
8A PnB14 Monitor Select for SEL_MON2
8B PnB16 Zero Point Detection Range
8C PnB18 Forward Torque Limit
8D PnB1A Reverse Torque Limit
8E PnB1C Zero Speed Detection Range
8F PnB1E Speed Match Signal Detection Range
90 PnB20 SVCMD_CTRL bit Enabled/Disabled (read only)
91 PnB22 SVCMD_STAT bit Enabled/Disabled (read only)
92 PnB24 I/O Bit Enabled/Disabled (Output) (read only)
93 PnB26 I/O Bit Enabled/Disabled (Input) (read only)
Continued from previous page.
Common
Parameter No.
Common Parameter
No. for SERVOPACK
Name