Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
158
Default 0
Web UI Features->Door Phone->Device Type
Parameter
features.doorphone.X.display_name
[1]
<y0000000000xx>.cfg
Description
It configures the display name of the IP intercom to be displayed on the phone’s screen.
Note: It is not applicable to CP960 phones.
Permitted
Values
String within 99 characters
Default Blank
Web UI Features->Door Phone->Display Name
Parameter
features.doorphone.X.phone_number
[1]
<y0000000000xx>.cfg
Description
It configures the phone number or IP address of the IP intercom.
Note: It is not applicable to CP960 phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Door Phone->Phone Number
Parameter
features.doorphone.X.unlock_pin
[1]
<y0000000000xx>.cfg
Description
It configures the unlock PIN of the IP intercom.
Example:
features.doorphone.1.unlock_pin=8888*
When tapping the Open Door soft key after answering the call, the phone will send the DTMF sequence
“8888*” to the IP intercom. And if the DTMF sequence matches the code configured on IP intercom, the
door will be opened.
Note: It is not applicable to CP960 phones.
Permitted
Values
String within 99 characters
Default Blank
Web UI Features->Door Phone->Unlock PIN
Parameter
features.doorphone.X.full_screen
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to enter full-screen display automatically after answering the visitor’s call.
Note: It is not applicable to CP960 phones. It works only if “video.enable” is not set to 0 (Disabled).
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->Door Phone->Full Screen in Call
Parameter
features.doorphone.X.send_audio
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to transmit your audio during a visitor’s call.
Note: It is not applicable to CP960 phones.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English