Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
196
Values
Default 389
Web UI Directory->LDAP->Port
Parameter ldap.base <y0000000000xx>.cfg
Description
It configures the LDAP search base which corresponds to the location of the LDAP phonebook from
which the LDAP search request begins. The search base narrows the search scope and decreases directory
search time.
Example:
ldap.base = dc=yealink,dc=cn
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->Base
Parameter ldap.user <y0000000000xx>.cfg
Description
It configures the user name used to log into the LDAP server.
This parameter can be left blank in case the server allows anonymity to log into. Otherwise you will need
to provide the user name to log into the LDAP server.
Example:
ldap.user = cn=manager,dc=yealink,dc=cn
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->Username
Parameter ldap.password <y0000000000xx>.cfg
Description
It configures the password to log into the LDAP server.
This parameter can be left blank in case the server allows anonymous to log into. Otherwise you will need
to provide the password to log into the LDAP server.
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->Password
Parameter ldap.max_hits <y0000000000xx>.cfg
Description
It configures the maximum number of search results to be returned by the LDAP server. If the value of the
“Max.Hits” is blank, the LDAP server will return all searched results. Please note that a very large value of
the “Max. Hits” will slow down the LDAP search speed, therefore it should be configured according to the
available bandwidth.
Permitted
Values
Integer from 1 to 32000

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English