Yealink T5 Series

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
220
Description
It enables or disables the digit map to be applied to the numbers dialed from the directory.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by
the parameter “account.X.dialplan.digitmap.apply_to.directory_dial” takes precedence over that con-
figured by the parameter “dialplan.digitmap.apply_to.directory_dial”.
Permitted
Values
0-Disabled
1-Enabled
Default Blank
Parameter
account.X.dialplan.digitmap.apply_to.history_dial
[1]
<MAC>.cfg
Description
It enables or disables the digit map to be applied to the numbers (received calls or missed calls) dialed
from call log lists.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by
the parameter “account.X.dialplan.digitmap.apply_to.history_dial” takes precedence over that configured
by this parameter.
Permitted
Values
0-Disabled
1-Enabled
Default Blank
Parameter
account.X.dialplan.digitmap.apply_to.forward
[1]
<MAC>.cfg
Description
It enables or disables the digit map to be applied to the numbers that you want to forward to when per-
forming call forward.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by
the parameter “account.X.dialplan.digitmap.apply_to.forward” takes precedence over that configured by
the parameter “dialplan.digitmap.apply_to.forward”.
Permitted
Values
0-Disabled
1-Enabled, the incoming calls will be forwarded to the desired destination number according to the string
of the digit map.
Default Blank
Parameter
account.X.dialplan.digitmap.apply_to.press_send
[1]
<MAC>.cfg
Description
It enables or disables the entered number to match the predefined string of the digit map after tapping a
send key.
The off-hook dialing includes: pick up the handset, press the Speakerphone key or tap the line key when
the phone is idle.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by
the parameter “account.X.dialplan.digitmap.apply_to.press_send” takes precedence over that configured
by the parameter “dialplan.digitmap.apply_to.press_send”.
Permitted
Values
0-Disabled
1-Enabled
Default Blank
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.