Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
278
1-Enabled. If there is an active account, the phone will play the default dial tone. If there is no active
account, the phone will play the dial tone configured by “voice.tone.dial”.
Default 0
Parameter voice.tone.secondary_dial <y0000000000xx>.cfg
Description
It customizes the secondary dial tone.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
Values
String
Default 350+440/3000
Web UI Settings->Tones->Secondary Dial
Parameter voice.tone.ring <y0000000000xx>.cfg
Description
It customizes the ringback tone.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Ring Back
Parameter voice.tone.busy <y0000000000xx>.cfg
Description
It customizes the tone when the callee is busy.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Busy
Parameter voice.tone.congestion <y0000000000xx>.cfg
Description
It customizes the tone when the network is congested.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English