Yealink T5 Series

Audio Features
279
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Congestion
Parameter voice.tone.callwaiting <y0000000000xx>.cfg
Description
It customizes the call waiting tone.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Call Waiting
Parameter voice.tone.dialrecall <y0000000000xx>.cfg
Description
It customizes the call back tone.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Dial Recall
Parameter voice.tone.info <y0000000000xx>.cfg
Description
It customizes the info tone. The phone will play the info tone with the special information, for example,
the number you are calling is not in service.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Info
Parameter voice.tone.stutter <y0000000000xx>.cfg
Description
It customizes the tone when the IP phone receives a voice mail.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.