Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
32
Default 0
Web UI Network->Advanced->VLAN->WAN Port->Active
Phone UI Settings->Advanced Settings (default password: admin) ->Network->VLAN->WAN Port->VLAN Status
Parameter
static.network.vlan.internet_port_vid
[1]
<y0000000000xx>.cfg
Description
It configures the VLAN ID for the Internet port.
Note: It works only if “static.network.vlan.internet_port_enable” is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 4094
Default 1
Web UI Network->Advanced->VLAN->WAN Port->VID (1-4094)
Phone UI Settings->Advanced Settings (default password: admin) ->Network->VLAN->WAN Port->VID Number
Parameter
static.network.vlan.internet_port_priority
[1]
<y0000000000xx>.cfg
Description
It configures the VLAN priority for the Internet port.
7 is the highest priority, 0 is the lowest priority.
Note: It works only if “static.network.vlan.internet_port_enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 7
Default 0
Web UI Network->Advanced->VLAN->WAN Port->Priority
Phone UI Settings->Advanced Settings (default password: admin) ->Network->VLAN->WAN Port->Priority
Parameter
static.network.vlan.pc_port_enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the VLAN for the PC port.
Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation). It is not applicable to
CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Network->Advanced->VLAN->PC Port->Active
Phone UI Settings->Advanced Settings (default password: admin) ->Network->VLAN->PC Port->VLAN Status
Parameter
static.network.vlan.pc_port_vid
[1]
<y0000000000xx>.cfg
Description
It configures the VLAN ID for the PC port.
Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation) and “stat-
ic.network.vlan.pc_port_enable” is set to 1 (Enabled). It is not applicable to CP960 phones.
Permitted
Values
Integer from 1 to 4094
Default 1