Yealink T5 Series Administrator's Guide

Phone Network
33
Web UI Network->Advanced->VLAN->PC Port->VID (1-4094)
Phone UI Settings->Advanced Settings (default password: admin) ->Network->VLAN->PC Port->VID Number
Parameter
static.network.vlan.pc_port_priority
[1]
<y0000000000xx>.cfg
Description
It configures the VLAN priority for the PC port.
7 is the highest priority, 0 is the lowest priority.
Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation) and “stat-
ic.network.vlan.pc_port_enable” is set to 1 (Enabled). It is not applicable to CP960 phones.
Permitted
Values
Integer from 0 to 7
Default 0
Web UI Network->Advanced->VLAN->PC Port->Priority
Phone UI Settings->Advanced Settings (default password: admin) ->Network->VLAN->PC Port->Priority
[1]
If you change this parameter, the phone will reboot to make the change take effect.
DHCP VLAN
Yealink phones support VLAN discovery via DHCP. When the VLAN discovery method is set to DHCP, the phone will
examine DHCP option for a valid VLAN ID. The predefined option 132 is used to supply the VLAN ID by default. You
can customize the DHCP option used to request the VLAN ID.
The following table lists the parameters you can use to configure DHCP VLAN discovery.
Parameter
static.network.vlan.dhcp_enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the DHCP VLAN discovery feature.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Network->Advanced->VLAN->DHCP VLAN->Active
Phone UI Settings->Advanced Settings (default password: admin) ->Network->VLAN->DHCP VLAN->DHCP VLAN
Parameter
static.network.vlan.dhcp_option
[1]
<y0000000000xx>.cfg
Description
It configures the DHCP option from which the phone will obtain the VLAN settings.
You can configure at most five DHCP options and separate them by commas.
Example:
static.network.vlan.dhcp_option = 132,138,123,136,145
Permitted
Values
Integer from 1 to 255
Default 132
Web UI Network->Advanced->VLAN->DHCP VLAN->Option (1-255)
Phone UI Settings->Advanced Settings (default password: admin) ->Network->VLAN->DHCP VLAN->Option
[1]
If you change this parameter, the phone will reboot to make the change take effect.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English