Chapter 3 PERFORMING MEASUREMENTS
3-92
Switching the Folder to Another
This section explains how to change the folder.
Assuming that the selected drive has the following folder structure.
Root 2003
2004 Apr 1-15
16-30
May 1-15
16-31
Jun 1-15
16-30
Jul 1-15
16-31
Aug 1-15
16-31
The method of changing from one folder to another is explained below.
♦ Example: “Root folder” → “2004” → “Jun” → “16-30”
•Before specifying a folder, make sure that the folder is created using a personal
computer or by this instrument. It is not possible to specify a folder if it is not
created. In this case, the measured data will be saved to the root folder.
•In the case of the root folder on a storage media that has been initialized by FAT
16, up to 512 files
(*1)
can be stored.
*1:File names must consist of 8 characters (excluding file extension). “512” also
includes the number of folders.
For the method of creating a folder by this instrument, refer to page 6-27.
1. Locate the cursor to “FOLDER” by using the arrow key.
Caution
Refer
To Next Page
Loading...
