Chapter 3 PERFORMING MEASUREMENTS
3-94
Changing the File Type (Extension)
This section explains how to change the file type.
♦ Example: “.BMP(Image)” → “.SOR (Telcordia)”
1. Locate the cursor to “FILE TYPE” by using [S] / [T].
2. Press [ENTER].
A selection window will appear.
*: Indicates the default setting.
TIP
*.SOR (Telcordia) Saves the measured data in a format that conforms to
Telcordia SR-4731.
.TRD(AQ7260) Saves the measured data in AQ7260’s file format.
.SET (Setup) Saves the measurement conditions.
.LST (Event List) Saves the event list in text format.
The measurement conditions and traces are not saved.
.BMP (Image) Saves the screen displayed before [FILE] is pressed in
BITMAP format.
.TIF (Image) Saves the screen displayed before [FILE] is pressed in
TIFF format.
.SOR(Bellcore) Saves the measured data in a format that conforms to
Bellcore GR-196-CORE.
Selectable
file types
.CSV Saves the measured data in CSV format.
To Next Page
Loading...
