13-4
IM PX8000-02EN
Setting the Source Waveform (Trace)
The waveforms that you can select differ depending on the window that cursor measurements will be
performed in.
• T-Y: OFF, U1 to U4, I1 to I4, P1 to P4, AUX3 to AUX8, Math1 to Math8
• X-Y: OFF, XY1 to XY8
• FFT: OFF, FFT1, FFT2
13.3 Measuring with Marker Cursors (Marker)
To Next Page
Loading...
