24-9
IM PX8000-02EN
24.8 Storing and Recalling Setup Data
This section explains how to store the PX8000 settings to the internal memory and how to recall
settings from the internal memory.
► Features Guide: “Storing and Recalling Setup Data (Setup Data Store and Recall)”
UTILITY Store/Recall Menu
Press UTILITY and then the Setup Data Store/Recall soft key to display the following menu.
Starts storing
Starts recalling*
Clears the stored setup data*
Set comments.
Specify the store/recall number (1-16).
Date and time when the data was stored*
* This appears when data is stored in the internal memory at the specified store/recall number.
To Next Page
Loading...
Need help?
General
