23-6
IM PX8000-02EN
23.5 Using SNTP to Set the Date and Time
This section explains how to use SNTP to set the PX8000’s date and time.
• SNTP server
• Timeout
• Executing time adjustment
• Automatic adjustment
► Features Guide: “SNTP (SNTP)”
UTILITY Network Menu
Press UTILITY and then the Network soft key to display the following menu.
Configure the SNTP settings.
Configuring SNTP Settings (SNTP)
Press the SNTP soft key to display the following screen.
Executes time adjustment
Configure the SNTP server settings
(IP address; host name and domain name can be
set when DNS is enabled).
Turns automatic adjustment on and off
Set the timeout value (1-60 s).
To Next Page
Loading...
Need help?
General
